888-705-7555. Call Now!
Flooring Adhesive: Superior MCVB-35

Flooring Adhesive: Superior MCVB-35

Regular price
$115.00
Regular price
Sale price
$115.00
Sold out
Unit price
per 

BUY ONLINE = ZERO SALES TAX!!
Most Delivered in 3-5 Business Days!
  • Warranty: NO

  • Min. Order Qty: 200SF
  • SKU: H4LSTFPUM950ADH
Educated Consumer is our Best Customer

 

Urethane adhesive for all Engineered Hardwood Flooring with Vapor Barrier



  • LEED Qualified
  • Ozone Friendly
  • Special Polymer Will Not Etch Floor’s Finish
  • Contains No Isocyanates
  • No Rolling Required
  • Drying Time: Between 24-48 hours
  • Packaging Size: 3 gal plastic pail, 36 per pallet
  • Shelf Life: 12 months in original unopened container

     

    General Features:

    • LEED qualified, contains no isocyanates, high shear strength, contains no solvents, contains no VOC, certified “green”, certified “very low emission”, nonflammable, high solids content, ozone friendly, Freeze/thaw stable.
    • Installation Features: wet lay - no flash time required, strong green grab, non-slump formula, bridges normal sub floor variations, very low odor, cleans with acetone, no rolling required, excellent spread rate, long open time, spreads easily, higher temp & RH will shorten drying time.
    • Long Term Features: resistant against aging, remains elastic, suitable for radiant heat systems with primer, allows normal dimensional changes in wood flooring, adhesive is waterproof when cured, No health hazards, Stronger shear strength reduces cupping.
    • Pre-Installation Checklist: A successful installation requires proper preparation of the sub floor. Read and understand all applicable guidelines and technical data sheets before installation. Follow industry standards and flooring manufacturer’s recommendations for sub floor moisture content, design, layout and application of flooring materials. All slab constructions must meet the specific requirements of the floor covering to be installed.
    • Sub Floor Examination: Prior to installation, the sub floor must be checked according to NWFA installation guidelines. It must be solid and sound, flat, permanently dry, clean, free of chaps, indentations and anti-adherents, as well as resistant to pressure and tension. Moisture content of all floors must be measured before installation. All wood floors should have 6-9% moisture content at installation. There should be no more than a 4-5% variance in moisture content between the wood flooring and any wood sub floor. See NWFA guidelines and the wood flooring manufacturer’s recommendations for details. When adhesive is not used as a moisture barrier, moisture content in concrete sub floors must be below 3#/24h/1,000 sq. ft. using the Calcium Chloride Test or below 75% RH using an in-situ probe. No moisture testing is required and a moisture barrier of up to 25#/24h/1,000 sq. ft. using the calcium chloride test or up to 100% RH using an in-situ probe may be achieved when used in conjunction with a moisture control clip-on blade (up to 35 SF/gal) and as long as none of the following conditions exist: Hydrostatic pressure, Excessive vapor emissions, Missing or compromised vapor barrier, Standing water or visible dampness, Uneven and/or unapproved sub floor materials, Improper substrate preparation, Improper installation or complaints related to the flooring material, Faulty accessories and/or Hardwoods4less products used in conjunction with those of other manufacturers, Excessive exterior water (damaged water pipes, sinks, icemakers, faulty plumbing, flooding, etc.), Excessive topical moisture, improper ventilation or conditioning, or faulty maintenance of flooring, Solid Hardwood installation below grade, Use of Adhesives as a moisture control system below grade.
    • Sub Floor Preparation: Depending on type and condition of sub floor, a mechanical treatment (e.g. mechanical brushing, grinding or sanding) may be required. Intensity of such work must be determined at the site by the installer. Dust, paint, residual adhesives or other surface contaminants must be removed by suitable means. Cleaning the surface with an industrial vacuum cleaner is recommended. Cracks and gaps must be filled with concrete crack filler unless they are expansion joints. Level when necessary to 3/16 inches within 10 feet. Heated sub floors must be primed.
    • Installation Procedure: Spread the adhesive with the appropriate notched trowel. Avoid excessive adhesive thickness by passing the trowel evenly through the adhesive at a 45 degree angle. There is no flash time, so installation should begin immediately. Lay the flooring into the adhesive, correctly position it and press down firmly. Rolling is neither required nor recommended. Be sure to check the boards at regular intervals to make certain good adhesive transfer from floor to flooring is accomplished. Bowed boards or boards over low spots should be weighted down until the adhesive cures.
    • Limitations: This adhesive is mold and mildew resistant and waterproof when fully cured and will not dissolve if it gets wet. However, it will not prevent moisture-related damages to wood flooring unless it is used as a moisture barrier within the limitations set forth in the technical data sheet. Do not install solid wood below grade. Do not use on concrete with curing agents or sealers. Do not install wood flooring with a moisture reading above 9%. Do not use adhesive as a leveling material.

    Additional Information:

    • Trowels are available for item. For this specific adhesive you will need Trowel #12 and they are $10 per trowel.
    • The average weight per pail is around 48 lbs.
    • The spread rate per pail is 35 Sq.Ft per gallon
    • Each pail contains 3 gallons.

     

     

    Approved Flooring: Engineered Wood Flooring, Flooring must be straight and flat, Bamboo or Eucalyptus Flooring (except Strand Woven Products) Approved Sub Floors: Concrete Slabs, OSB (underlayment grade), Plywood (underlayment grade), Ceramic Tiles, Stone, Terrazzo, Cured Leveling Compounds, Radiant Heated Cure Time until Normal Traffic: between 24 and 48 hours Clean-Up: Use acetone while wet, Use plastic scraper and terry cloth when dry Room Conditions: 50°-90°F, 30% - 80% humidity Shear Strength: 290 psi (2.0 N/mm²) Shelf Life: 12 Months in original, unopened container

    You may also like

    • Flooring Adhesive: Superior MCUS-40
      Regular price
      $125.00
      Sale price
      $125.00
      Regular price
      Unit price
      per 
      Sold out
    • Flooring Adhesive: Superior MCU-55
      Regular price
      $89.99
      Sale price
      $89.99
      Regular price
      Unit price
      per 
      Sold out
    • Unfinished Maple #3 Common Grade Hardwood Flooring
      Regular price
      $0.00
      Sale price
      $0.00
      Regular price
      Unit price
      per 
      Sold out
    • Unfinished Maple #2 Common Grade Hardwood Flooring
      Regular price
      $0.00
      Sale price
      $0.00
      Regular price
      Unit price
      per 
      Sold out
    Back to all products